brugal
New member
just new to this very informative site.recently just purchased a 01 sxr 700 and have completed the can mod and reed mod,head gasket not yet but am considering 1 layer removed.just got a 51/43 helix to put in secondary.and just got new stock yamaha weights,14.5 mm rollers and 4.5 ,3.1 rivets and a new stock spring for primary.seems like that set up has been well tried and liked so figured I would just do it.thnx to all the ty guys for the info.
SWEDE
New member
You'll like that sled, I removed 2 layers from the head gasket with no problems. You may also want to put 142.5 mains straight acrossed and lower the needles 1/2 position
brugal
New member
so far I'm liking in it great to work on.got 143.8 in pto side for now and 142.5 on the two.needles moved.all clutch parts are in.going to remove just middle layer as 91 octane is most common premium fuel at pumps around here,atleast by sled.can and wil get 94 but only in jerry cans from petro canada.