viperhauck
Member
Hi, My friend has a -99 vmax 700 with aaen triple pipes and two layer headgasket. He had heelklickers now but the sled doesent rip as it should. It is good of the line but thats it. We can not load the weights more, if we do the rpms drop. I have suggest to skip the heelklicker and work with some yamaha weigts and maybe a different helix and springs. So...any tips what we would start with? He want a engagement rpm around 5-5500.
Tech pages Look for 8CA's they hall
YAMMIEGOD3:16
Active member
8CA, 52-42 HELIX. SLED WILL FLY. 3:16 (yammie tony)
viperhauck
Member
YAMMIEGOD3:16 said:
Ok, sounds good. But wich rivets and springs?
viperhauck
Member
And is this 8ca weigt oem on a sled or a yamaha option weight? Where can i find it?
//Thanks Henrik
//Thanks Henrik
YAMMIEGOD3:16
Active member
DEALER CAN GET THEM, THEY ARE YAMAHA WEIGHTS. I WOULD START AT AROUND 50 GRAMS. 3:16 (yammie tony)
Make sure clutch is cleaned and in working order
viperhauck
Member
Wich springs? oem?
to clutch at 9000 rpm , with 8ca's ,put some aluminum rivets in the tip, run a helix at close to what is suggested here and stock springs with 2 shims. should get you close!also put in 15 mm rollers....you may have to add a bit more weight to your 8ca's
Last edited: