cacsrx1
New member
Got the motor apart on my 98 Srx, figured as long as its apart I would fix the leaky powervalves. Is there an O ring or something in there that needs to be changed? The oil is coming out right where the cable enters the housing.
yes,oring needs replaced
tripple_tripple01
New member
leaky orings
i just did mine not long ago, i think they were about 8 bucks a piece, (need 3) solved the problem
i just did mine not long ago, i think they were about 8 bucks a piece, (need 3) solved the problem
nystateboySRX
New member
theres one small O-ring that are on each powervalve: If you are re-assembling it;...The O-ring will be the first thing you put on...o-ring, washer, lockpin, spring, center washer(looks like a solid washer but there is a grove for the powervalve cable to fit in the middle)...etc.
Last edited:
One of mine was spewing oil today, but it only does it on like the first ride of the season, then it doesn't do it anymore. I may just replace them to be on the safe side though.
cacsrx1
New member
Thanks for the help. Are they a standard O ring, or is a Yamaha part #.