The Polaris pre notched 1.25 track. Part number 2872087 ? I don't think they make them anymore and couldn't find anything googling it. I want to put a 1.25 on a Viper and know this is a good alternative without messing with trimming the track, removing heat exchangers or changing drivers. If you guys know of one or anyone that might have one laying around in stock, let me know. You guys are great. Thanks! 
you can just let it wear in. that is what we did on my brothers 02 viper when we put in the 136" ripsaw. just makes it a little harder to put the drive axle in is all.
jaws jr
New member
Heres some #'s of possible places to try that are around the roseau area.Pro 5 218-463-2149, huberts 218-681-5981, or north country 218-386-4486
livewire_101proof
Member
I see a kid that was just gonna let it wear and ended up wearing through half of his protectors, each one looked like 2 knifes. But that sled was pretty rickety anyhow and had many other issues, they beat it pretty hard and never maintained so may not bad as exaggerated for most people. Something to watch for though. I've put one in once that didn't rub so guess it depends on sled