I am mounting an IQ skid in an SRX.
I need to figure out what length and diameter mounting bolts I need for the front mounts.
I am buying 4"x5" x 1/2" aluminum spacers for the inside of the tunnel. I measured the depth of the mounting shaft threading and it is 2 1/2" deep.
So I know I need a 3"+ bolt, need to now thickness of the tunnel to add to that, also need to now the diameter of the skid shaft threading, I think I read 7/16" on another post but need to confirm that as well.
Anyone that knows would appreciate your help..
I need to figure out what length and diameter mounting bolts I need for the front mounts.
I am buying 4"x5" x 1/2" aluminum spacers for the inside of the tunnel. I measured the depth of the mounting shaft threading and it is 2 1/2" deep.
So I know I need a 3"+ bolt, need to now thickness of the tunnel to add to that, also need to now the diameter of the skid shaft threading, I think I read 7/16" on another post but need to confirm that as well.
Anyone that knows would appreciate your help..