Mac
Member
I purchased this stuff roughly ten years ago. Does anyone know who manufactured these parts. Hard drive is full. Sectors are loosing data quickly. ---mac---
Last edited:
first pic are remote fuel screw adjusters, look alot like what bender sold.
second pic appears to be an adjuster bracket, possibly an extension of sorts, that mounts to the rails where the rear axle would be. may have been an attempt at losing the steel bracketry for billet as a weight savings? looks homemade.
second pic appears to be an adjuster bracket, possibly an extension of sorts, that mounts to the rails where the rear axle would be. may have been an attempt at losing the steel bracketry for billet as a weight savings? looks homemade.
ottawaair
New member
Looks like a rail extension, albeit a short one. I thought those adjusters were made by thunder products ? I could be wrong.
Mac
Member
Its an axle relocation kit for an 8" pro action. Who made it? I used a Sawzall to cut the entire rear section off a damaged rail.
Those 8" rear idler axle relocation kits are made by Mountain Performance. They can be purchased in variable rail extensions from zero and up. I run them on all my Yamaha pro actions.
Bob
Bob
Mac
Member
Thanks Bob,
I was knew one of the regulars would know where these parts came from.
I was knew one of the regulars would know where these parts came from.