Replacement track for my 2000 SRX 700

[rx1jim]

After 13100 miles it is time to replace the track on my SRX. The candidate tracks I am looking at are a Camoplast Ice Attack (ripsaw style with the molded in metal studs) or a hacksaw or a predator (carve) all with a 1" tall lug height.

Anybody have experience with these tracks on an SRX?

Will a track with a 1" tall lug profile fit without rubbing?

Thanks!!!

Jim

 

[motorhead327]

I have a kimpex X-Force and its been real good! Shadetree has them on closeout right now too. They were like $750. http://www.shadetreepowersports.com...etail?loadItem=04-748-125K&loadItemProcessed=

 

[chascook]

yes the inch track will fit fine i got 1 1/2 and i got a little room not much but i dont have any studs either. everyone i ride with love the ripsaws but another likes the ice attack hooks ups pretty good not the same as studs but gets the job done

 

[tomseal6]

going to go to a 1 inch hack saw when i replace

 

[rx1jim]

Thanks for the replies. I am leaning towards the ice attack track. I know the small ice picks in teh track will not be comparable to adding studs. The track is for my son's SRX, I want him to have the added safety benefit of the ice picks on ice.

Thanks,

Jim

 

[richierich]

I would do the IceRipper XT which is a Ripsaw with premolded in studs with a pointed carbide tip.Awesome hookup and enough traction for icy conditions.It'll also fit in there without any mods.

 

[bluemonster1]

but once they wear down..you can't replace them and are back to regular studding.

 

[richierich]

They will outlast the track...