Well, here is my 2000 srx that I have owned since new. It has about 11,000 miles or so. Was my trail sled till 2005 when I picked up my warrior. in 03 I stretched it to a 136 with a 1" track. In 2005 I stretched it even further to a 144X1.5. In 2009 I shortened it back up to a 121 and ran as an Ice dragger. I finally freshened up the top end in 2010. My SRX has had the stock skid, a warrior skid, a ski-doo SCIII, another SRX skid and now.....Well, with no snow on the ground and waiting on parts for the nytro MTX I decided to change up the SRX once again. I decided to use up some parts I had kicking around. Expert X 136" Camoplast Predator 1.25 X 136". whal bros 8 tooth anti ratchet drivers. A tow bumper I had from parting out my warrior. A 2003 Ski-Doo beaver delete tail piece from a ski-doo I stretched out to a 144 a few years back. A nytro seat I had kicking around. I am going to use the tail light from my Nytro MTX as well. It has Viper trailing arms and spindles. Still have plenty to do to it, but its a start.
super1c
Super Moderator
WOW that is nice! You did a great job!
Thanks, still have a few finishing touches to put on it.
I want that seat!
taylzee
New member
Whatcha ya gonna do with clutching and gearing???
With the swap to 8 tooth I am going to leave the gearing alone for now. As for clutching........No idea....LOL
How did you mount the seat?
Coles_55 said:
I used some square tube aluminum. I will post pictures of that tomorrow.
03viperguy
Moderator
looks great, differnt than when we met up in pittsburg a few years back 
sleddineinar
VIP Member
WOW! Looks sa-weet!
dmax66
New member
Looks good. Great job, nice to see another nytro seat. What is that tail light off of.
Last edited:
kgwmu
New member
Can you get more pics of how you mount the front of the seat? I am going to try to do this to my sled before this season! thanks
Backwoods M Max
New member
kgwmu
New member
looks good, how much did you cut down the seat? got any finished pics?