srx with 8 tooth drive gear

[billo6663]

i just put a ripsaw 1 1/4 track with 1 1/2 studs with a 7 tooth sprocket it works good but i was wondering if i could go with a 8 tooth sprocket without hitting the heat exchangers in front
any info would be greatly appreciated

 

[mattysmith440]

i have 1 3/4 track on my srx with 8 tooth drivers, ive hit her hard and never rubbed my track on my heat exchanger so im sure u will be fine.

 

[powervalve01]

u can get heat exchanger guards to just to be safe with the studs

 

[ottawaair]

yes 8 tooth r fine. I am running the same setup with 8 tooth.