98srxrider
Member
I seem to remember awhile back that someone one here was selling allen head screws for the carb bowls. Does anyone else rememeber this or who it was. I couldn't find anything when I was searching.
A couple of bucks
VIP Member
Someone in the PIF section of the classifieds had some. I just went down to my local ACE in Dixon and got an entire set for well under 5 bucks.
A couple of bucks
VIP Member
4mm x 12mm . 10s will work though.
Devilin AblueDress!
New member
X2, I didnt go to the ace in dixon though! Allen head, torx, hex anything better than them dam phillips heads!
It was http://sledtoyz.com/. I just bought some. Maybe could have got them a little cheaper somewhere else, but I like to support other forum members and this was a no hassle way of being sure I got the right thing the first time.
ALLSEASONRIDER
Member
go stainless...not that much different in price.
rx1jim
New member
Stainkess steel allen head (socket head cap screws) are the way to go!! You will never have a problem with the carb bowls screws again!
motorhead327
VIP Member
A little bit of anti-seize works wonders too!
98srxrider
Member
Thanks guys, I found some.
rx1jim
New member
Anti-sieze compound is our friend! It always makes you glad you used it when you have to get a screw or bearing out for service work.