Hey guys,
what are the stock rivets loaded in the 8dn-20 on an srx. How hard are they to change out to 4.5's if they are not already loaded as such.
what are the stock rivets loaded in the 8dn-20 on an srx. How hard are they to change out to 4.5's if they are not already loaded as such.
YAMMIEGOD3:16
Active member
Only Change (3.6) Inner. Tip Has 4.5. 3:16 (yammie Tony)
ottawaair
New member
Easy to remove. I just grind down one side, find a socket that just fits over rivet head, then tap it out with a punch. Lot of guys drill them, but I found this way easier.
mopar yam
New member
sorry for butting in , by changing the inner rivet to the 4.5 what is the outcome ,better belt grab or ?