b1r2s
New member
Located near Albany NY, and listing this for my father.
Sled is an 02 700 w/ Hauk primary and driven clutch kids, pipes (I THINK D&D, but not sure, also have stock pipe), plenty of track left with woody's studs, 1 season on woody's dually skags, low windshield
Toward the end of last season it sounded like it was running on two cylinders, so after a compression test tore down the top end and found all 3 pistons worn, and one cyl wall shot. Purchased brand new set of pistons and a remanufactured sleeve, then decided to tear the bottom end down to check bearings, seals, etc and found the crank bearings to be totally hosed
the sled isn't worth the price of a new shaft, so we're offering it up for parts.
If I don't get a bite in a few weeks I'll part it out, so please PM me or post part requests.
The motor is reassembled and currently out of the sled. I can hook it back up if desired. It WILL run, but as I said, the crank bearings have very little life left in them.
Other than the bearing issue, the sled is in really nice shape. Never wrecked, run by a 66 year old man who babied it more than his own kids, lol.
Please PM me or reply with any questions. I would like to recover the money in the new/reman parts and time to tear it down, around $900.
Sled is an 02 700 w/ Hauk primary and driven clutch kids, pipes (I THINK D&D, but not sure, also have stock pipe), plenty of track left with woody's studs, 1 season on woody's dually skags, low windshield
Toward the end of last season it sounded like it was running on two cylinders, so after a compression test tore down the top end and found all 3 pistons worn, and one cyl wall shot. Purchased brand new set of pistons and a remanufactured sleeve, then decided to tear the bottom end down to check bearings, seals, etc and found the crank bearings to be totally hosed
the sled isn't worth the price of a new shaft, so we're offering it up for parts.If I don't get a bite in a few weeks I'll part it out, so please PM me or post part requests.
The motor is reassembled and currently out of the sled. I can hook it back up if desired. It WILL run, but as I said, the crank bearings have very little life left in them.
Other than the bearing issue, the sled is in really nice shape. Never wrecked, run by a 66 year old man who babied it more than his own kids, lol.
Please PM me or reply with any questions. I would like to recover the money in the new/reman parts and time to tear it down, around $900.
It's bad to post classifieds in the main forum. I bet this gets removed lol
b1r2s
New member
Hmm didn't notice a classified section, my bad. Is there a way to move the post? or wait for mods to get it?
You can't post in the classifieds unless your a VIP.
Jkkrad
New member
Sent PM about parts.
Devilin AblueDress!
New member
Costs 15 bucks to sell parts/sleds Well worth it if you plan on selling any amount of stuff
b1r2s
New member
Yeah just signed up, and will transfer the ad when I can post there.