Installing Head On A 2002 Viper

[thetorches]

I am putting head back on my viper. What bolts should i tighten first. Should i start on middle cylinder and work my way out or start at one end first. I understand i should torque bolts to 10 ft/lbs. first and then tighten to 20 ft/lbs. Is that right. Thanks for any help.

 

[andrew k]

here ya go. click to enlarge. a two step process wont hurt anything. 20ftlbs is what your looking for end torque.

 

[thetorches]

here ya go. click to enlarge. a two step process wont hurt anything. 20ftlbs is what your looking for end torque.

That was quick. Thanks alot Andrew. Thats real handy.

 

[andrew k]

That was quick. Thanks alot Andrew. Thats real handy.

im board and laid off till my job picks up in spring time. lol. got lots of time on my hands right now so with no snow on the ground i find myself hanging around ty quite a bit. lol but yep no prob.

 

[thetorches]

im board and laid off till my job picks up in spring time. lol. got lots of time on my hands right now so with no snow on the ground i find myself hanging around ty quite a bit. lol but yep no prob.

THANKS AGAIN. SAME UP HERE. NO SNOW. +8 TODAY. LET IT SNOW.