MY01SRX
New member
Has anyone tryed running a thicker base gasket or put a shim plate on the base of the cylinders?
staggs65
Moderator
pretty common mod on the 98-99s to run 2 base gaskets and mill the heads. the old "poor mans port job"
staggs65
Moderator
I guess it was add 2 base gaskets not run 2; there's a little info on it here http://www.totallyamaha.net/forums/showthread.php?t=59727&highlight=srx+raising+port+timing
but again thats on 98-99s. not sure if it works out any on your 01
but again thats on 98-99s. not sure if it works out any on your 01