WI ATV License Plate Requirements
Effective July 1, 2012, all ATVs and UTVs registered as public use will be required to furnish and display a rear plate in addition to the 2 side decals furnished by DNR,: This change was added after many discussions over the years with various experts and user groups based on surveys and meetings.
Plates can be created or purchased by the registered owner. Plate specifications are: must be a minimum of 4 inches in height and 7 1/2 inches wide; must be white; black lettering a minimum of 1 1/2 inches high with a minimum 3/16 inch stroke; needs only the 4 registration numbers and two letters that follow same as on the registration decal; owner shall maintain the plate so it is in legible condition; and the plate shall be attached to the rear of the vehicle.
Effective July 1, 2012, all ATVs and UTVs registered as public use will be required to furnish and display a rear plate in addition to the 2 side decals furnished by DNR,: This change was added after many discussions over the years with various experts and user groups based on surveys and meetings.
Plates can be created or purchased by the registered owner. Plate specifications are: must be a minimum of 4 inches in height and 7 1/2 inches wide; must be white; black lettering a minimum of 1 1/2 inches high with a minimum 3/16 inch stroke; needs only the 4 registration numbers and two letters that follow same as on the registration decal; owner shall maintain the plate so it is in legible condition; and the plate shall be attached to the rear of the vehicle.