Shail800
New member
hey guys
i just finished 2 race weekends on asphalt with my 2001 sxr 700 and im only getting 90mph out of it not bad but i know i can get it faster
done to it is
rebuilt motor
power inc pipes
20/40 gears
135 135 137.5 jets 50 pilot jets and going down on mains
some clutching work but not to sure about the wieghts and springs of the primary cuz i borrowed it off a srx 700 race sled
secondary had a 45 degree helix and tried a steeper angle bud did nothing
i know my pipes are supposed to have peak rpm of 9200 but only gettin 8400 which means losin hp big time how would i get my clutches to shift fast to get to 9200 rpm im an 1/8 mile drag race
im guessing my clutching might be slowing me down just dont have the knowledge to get my rpms up if anyone has any suggestions i would appreciate them
thanks daren
i just finished 2 race weekends on asphalt with my 2001 sxr 700 and im only getting 90mph out of it not bad but i know i can get it faster
done to it is
rebuilt motor
power inc pipes
20/40 gears
135 135 137.5 jets 50 pilot jets and going down on mains
some clutching work but not to sure about the wieghts and springs of the primary cuz i borrowed it off a srx 700 race sled
secondary had a 45 degree helix and tried a steeper angle bud did nothing
i know my pipes are supposed to have peak rpm of 9200 but only gettin 8400 which means losin hp big time how would i get my clutches to shift fast to get to 9200 rpm im an 1/8 mile drag race
im guessing my clutching might be slowing me down just dont have the knowledge to get my rpms up if anyone has any suggestions i would appreciate them
thanks daren