Dynoed my harley today

tomseal6

VIP Member
Joined
May 25, 2003
Messages
3,014
Age
45
Location
Brevort, MI
I have a 2012 Dyna wide glide 103 CI motor (1690cc) with the following mods that Dynod today at 105 FT LB and 85HP

Got the SE 204 Cams put in my bike a few days ago

Mods:

Samson street sweeper exhaust
Breather kit that was included with pipes
Excell Ignition, coils, and Denso plugs
SE 204 cams
 

Attachments

  • rsz_1rsz_1rsz_1rsz_120120630_195202.jpg
    rsz_1rsz_1rsz_1rsz_120120630_195202.jpg
    272.6 KB · Views: 7

Did you happen to get a stock dyno result? I have a 2011 fatbob 96ci, VH big radius 2into1, screamineagle heavy breather and race tuner. Went from 64 to 72hp. Was hoping for more. Took a test ride on a 103 w/cam kit (so the dealer said) but was dissappointed in the drop in low end torque. You happy with your results?
 
it is. had a 99 sporty 1200cc with cams and pipes the put out 65HP at the wheel.

HP is irrelevant though on a harley. The big v-twins are torque monsters. The sport bikes put out no where near the torque I have but that's comparing apples to oranges.

Its not a super fast bike but it aint slow either
 
not bad at all. I have a neighbor with a big old police bike. nice ride, but I think I like the jap bikes myself. other neighbor has an 1800 ( I think?) vtx and it has 120tq at the rear wheel. silly the tq for a bike. harley neighbor also has a sporty with very similar mods to yours. about the same power. but it sure looks like fun :)
 


Back
Top