8bu-10 setup for radar

t-rav

New member
Joined
Aug 27, 2008
Messages
179
Age
35
Location
hanmer,ontario
what is everyone running in there 8bu-10 setup i got 4.5 in the tip what should i put in center im running either maxxx white or just www in primary and red with 50-40 helix in secondary
 

What sled/engine? Your sled is shown as vmax 600, but this is posted in SRX/Viper.
Clean out your pm's, you seem to always be full...
 
I'm running 8bu-10's with 4.5 in both holes, maxx red primary, 1 thin shim, green yammy sec. spring, 52-40 maxx helix, 90 wrap. Good for 104 in 1000 ft. Stock 98 gears. 8300 rpm. I'm going to try 00-02 hyvo gears and possibly a bender 51-37 helix to get to 8500rpm and hopefully reduce sec. Wrap to 60.
 
t-rav said:
what is everyone running in there 8bu-10 setup i got 4.5 in the tip what should i put in center im running either maxxx white or just www in primary and red with 50-40 helix in secondary
MY EXACT SET-UP IN MY 2002. 110 IN 1000 F.T. ON RADER AND GPS. 148 POUND DRIVER. 3:16 (yammie tony)
 


Back
Top