Harvey
New member
or some thing close?02 SRX-stock 8dn20s,4.5 grams each hole,w/w/w primary spring,50/42 helix,green secondary spring.I see a 50/40 helix is suggested in a few post but I dont have one at this time.anyone running any thing close to this?hows it work?thanks-Harvey
Harvey
New member
I ran this setup today in place of my heavy hitters and team secondary,and for some reason my dcs stopped coming on,I ran the HH/TEAM setup first and dcs was blinking at about 100,ran home,switched to this setup and no more dcs blinking,figure that one out.any ideas?thanks-Harvey
Are your rpm's any lower with the second setup? Any noticable performance differences?
8dn-20 set up
its just not leaning on the engine as hard as the first set up, thats all. You could be ok with the 50/42, it depends on the rpm up top and if the sled feels like to just be making noise and not pulling anymore. It matters as to whose helix it is, they dont all shift the same, differnt brands shift differnt ways, even tho they could be marked the same angles, it has to do with the radius and slope they are cut at. that set up works very good frot trail and small field running, I doubt your gonna get what I think YOU want tho Harvey......lol
its just not leaning on the engine as hard as the first set up, thats all. You could be ok with the 50/42, it depends on the rpm up top and if the sled feels like to just be making noise and not pulling anymore. It matters as to whose helix it is, they dont all shift the same, differnt brands shift differnt ways, even tho they could be marked the same angles, it has to do with the radius and slope they are cut at. that set up works very good frot trail and small field running, I doubt your gonna get what I think YOU want tho Harvey......lol
Harvey
New member
lol,ya,I was surprised how well it worked for just throwing it together and running down to the lake with it.It ran spot on for rpms.The conditions really are not that great on the lake yet,the snow is still pretty loose.thanks-Harvey