Long travel vmax project

[devinzz1]

decided to finally get some more travel/height out of the ol vmax. Picked up a set of rmk shocks and installed longer shocks in rear skid. Gona hope fully order some cb performance drop brackets within the week. To get the rmk shocks to fit the sway bar was removed, belly pan trimmed, spacers on tie rods, a little adjusting and thats it! front of sled was risen 4.5" and travel was increased. Drop brackets are definitely needed as the rear is way to low now. Lower radius rods will be repaired also ( bonus: my buddy bought a matching set and put them on a 380 skandic...super high! )

 

[Vmaxin]

hey let me know what you did to get the rear end to come up to the proper height to use the RMK shocks in the front. Really interested and hopefully going to do this over winter along with a set of triple pipes, a new top end and some anti rachet sprockets. Looks awesome!