Pipe ID

jabber800

jabber800

New member
Joined
Jul 8, 2007
Messages
686
Age
63
Location
Coniston Ont.
What kind of pipes are these?

I have looked them over well and have found no identifying markings!

I do know they are SRX high rpm pipes.

If anyone knows anything about these I would greatly appreciate any info on them.. Manufacturer? Peak power RPM etc.

Thx Dan
 

Attachments

  • pipe1.jpg
    pipe1.jpg
    152.7 KB · Views: 21
  • pipe2.jpg
    pipe2.jpg
    155.8 KB · Views: 20
  • pipe3.jpg
    pipe3.jpg
    90.2 KB · Views: 10

They look to be bender big bore trail pipes not the high rpm pipes, i had both set s from bender on the dyno the low rpm set made more tourqe. high rpm set few more HP but very narrow power band. 8500 rpm ran best if you tighten stingers up ran 8700 to 8900 real hot almost equalled power of the high rpm set!
 
Definately not bender bigbore pipes. Very short body. Almost the same size as my srx mod pipes. Very different header and stinger sections though. The owner said they made power at 9500.
 
Have you tried looking up several different manufacturers and find pics of the different kinds?
 
Last edited:
No but I spoke to Valin and he thinks they are Hauck high rpm pipes. I will check there site and call them tomorrow.
 
The Pictures of haucks high rpm pipes on his web site show them as welded pipes? I guess these are not haucks! Any know how may companys made race pipes for the SRX?
 
those are the hauck pipes, cpr made them for him, nothing but 600 ski doo pipes made to fit a yamaha.....ya lose alot of torq. with those, the only place they make any power is at 10,000-10,200rpm
 
Thx Don. I'm not looking for that high revving a pipe. Im setting up a 700 trail improver for radar runs and was hoping to spin the engine up around 9200/9300 rpm's. Looks like I'm going to have to go a bit higher! LOL I will try running another set of bender mods like I have on my 600srx. They make best power at 9700. It's going to be a fun ride down the lake.
 
hey dan mud lake is ready to go not sure iff you guys will be there at all but ill be out on the 02 wensday-sat you still runnin the srx this year
 
Running 4 sleds.
600 SRX improver
MPI stage 3 supercharged Apex
Trail 700 SRX
And my sons 2003 f7
We should have a couple very competitive sled at the runs this season.

Not sure if we will be out on Mud! Let me know who's fast out there this week, it may effect whether we go out or not. I'd love to ruin a few guys days around here. LOL
 
right on dan i will let you know dont there is much that will compete with your sleds out there or even my 02 but shes goin on the gun tom along with my lilltle piped 600 vmax
 
will do dan and whats is the best helix beside the 51-43 to run hows the 53-43 is it ok with the 8bu-10 setup
 
t-rav said:
right on dan i will let you know dont there is much that will compete with your sleds out there or even my 02 but shes goin on the gun tom along with my lilltle piped 600 vmax
Click to expand...



you have my old sled ???
 
You must log in or register to reply here.


Back
Top