84 enticer mod

[kristina]

any ideas on a way i can change the pitch from 3.29 to 2.52 on a 1984 yamaha enticer? im trying to put a 121 track onto it and have already got the the suspension done and a new 121x15x2.52 i just cant find a 6 inch drive clog that will fit on my 1 inch square jack shaft. any help would be much appreciated. thanks

 

[opsled]

Enticer long track sleds used a 2.52X 136 track. If you can find a drive axle from one of them you will be set.

opsled

 

[Maim]

http://www.royaldistributing.com/Catalogues/Main/2013-Fall-Winter/page136.html

there is apart # listed to put 2.52 drivers on from 3.29

 

[kristina]

found a jack shaft from a long track and it worked perfectly thanks for all the help

 

[kristina]

anyone ever put twin carbs on an enticer like this? or any ideas to get some more power out of him?

 

[Maim]

a basic cleaning of the ports and that is it. lots of guys have tried for more power out of the 340's over the years here and every one said to me leave it single carb, stock pipe and do a mild cleaning on the ports. the other stuff was not worth it and it made the sled less reliable in most cases.