Viper build to snoX

[zx440]

I have a 02 viper with slp pipes and 1.25 track. I bought the sled to make into a snoX racer replica.
I am thinking about putting a phazer seat on the sled
fox floats or HPG
1.75 track with 8" drivers
skid from a different sled.(sno pro, pro xr, MXZx)
motocross bars.
The last thing are the pipes. the SLP's are nice but I like the benders with a 3 cans.
Any one know of any pipes that are fabricated like the yamaha factory sled and not the stamped out pipes?
If any one has any parts to help out let me know.
I will get some pictures up soon.

 

[devinzz1]

yamaha used the hauck/CPR pipes (Not sure if all of them did) Dont see why you would swap out the slps because they are good pipes! There are a couple of good threads on here that show sno-x style builds. For example...

http://www.totallyamaha.net/forums/showthread.php?t=82753&page=5&pp=10

http://www.totallyamaha.net/forums/showthread.php?t=62213

and another better one by a Swedish member( If another member can post the link for me)

 

[zx440]

I just like the looks of the pipes made up of all the short parts and all the tig welds showing. and I like the 3 single cans per pipe over the one. thats all

 

[snoprokidf6]

i have mine built for such purposes, mogul mashing and jazz, i like passing 12,000 dollar sleds with my 2200 dollar 2002 dinosaur. The top link above is my build, i have the floats on it, great upgrade, as well as a pro x suspension, also a great upgrade, and a few other odds and ends. before you put triple pipes on your sled, i'd suggest some clutching and keeping the single pipe. triple pipes will bounce around under your hood with the riding you will be doing so a single pipe sounds better for your application, plus jetting wont be as critical and your mpg's wont be crappy. here are some pics