hessracing
Member
hey guys i did some playing with carbs got it tuned in good now i seemed like i had the choke able to tightp and it was pulled open a bit getting my load up on bottom end now i gotta beat my dads xlt!!! i have a stock helix off of my 00 srx 700 with a black spring with a pink mark on it is the angle of this helix different from the one on my vmax? and what holes should i put it on i cant remember the equation for the degree of wrap help!!
SX600abuser
Member
All the info you are seeking is located in the "technical pages" button at TY home.
Should be same helix if stock srx just dif spring
thefindian
New member
Pink mark on the spring Im not familiar with that one , as far as wrap 70 is usually the sweet spot for a good back shift when everything else is dialed in just right.