nelsonhouse
Member
my vforce3 reed has cracked in half. it was the middle cylinder. i have psi stockblaster triple pipes, i removed vforce reed cages, and reinstalled the stock reed cages, the air box is modified , carb jetting is: pilot:50 fuel screw: 2 turns slide: 3.5, nozzle: q-8/q-4/q-4 needle: 6dgm-05 3rd/4th/4th pos: main jet: 142.5/142.5/142.5 pto/mid/mag.
the sled does not start. what can i do?
the sled does not start. what can i do?
Attachments
chris700readhead
Member
Did those pilots work before? Sounds like a lot of fuel on the idle circuit, I only have 47.5 at 1.5 and mines ported.
nelsonhouse
Member
i had 45 pilots on before at 3 turns. where do i buy new reeds for the vforce3 cages?
SLICKER
New member
nelsonhouse said:
Royal Distributing sells replacement reeds.