shaggyzr2
Active member
Just wondering....what is the average cost to have a crank rebuilt for a SRX or SX triple? Who does good work with reasonable prices? I don't have any crank problems now but if it happens I'd like to know where to go and what it costs.
SWEDE
New member
Jeff at Midwest Crank in Green Bay, Wis. get a lot of good feedback.
Devilin AblueDress!
New member
X2 on jeff, Have heard great things. Cost really depends on what you send him. Completely fubared a grand isnt out of the question. If it just needs a "tune up" then more likely in the 4-500 range.
gil7247
VIP Member
x3 On jeff at midwest. He did a Viper crank for me last year went thru crank and replace 1 broken rod. Charged me $450. Great guy!
roudyroy1
Active member
Depeneds what you need done, just a simple run out fix, 400 or so. If it needs to be pressed apart and re mechined and what not. Your gonna break the bank
staggs65
Moderator
I had one that I changed out a complete section with a good section from another crank for $85. I also had one with a new rod, and new rod bearing for about $300