Hammer Down
Member
Decided to celebrate hunting trip with a few practice launches in the backyard before I left. Mistake! The speedo gear/bearing/axle assembly came loose and shredded the bulkhead. Should have left the hammer up!
YAMMIEGOD3:16
Active member
part it out. 3:16 (YAMMIE TONY)
Hammer Down
Member
That's what I was thinking. Might do that after I tear it down
And see extent of damage.
And see extent of damage.
stain
New member
I have a chassis but may be to far away...
ALLSEASONRIDER
Member
Decided to celebrate hunting trip with a few practice launches in the backyard before I left. Mistake! The speedo gear/bearing/axle assembly came loose and shredded the bulkhead. Should have left the hammer up!
Duuuuude...that is a bad day..good luck with the hunt though
YAMMIEGOD3:16
Active member
what sled is this ? 3:16 (YAMMIE TONY)
Hammer Down
Member
95 drag sled with bender pipes. Set up as stock improver.