SX 700 Stator fine still no spark???

SRX M10

New member
Joined
Jan 11, 2005
Messages
107
Location
South Wheelock VT
The sled quit and now has no spark on all three. Removed the stator and had it tested, it tested fine. Replaced spark plug caps also. Does anyone know how to bypass the throttle overide? We are going to start looking for bad wires. Really hoping it's not the cdi because they cost around $350. Has anyone had this problem?
 

You can bypass the TORS by un hooking the 2 wires that go to the carbs and pulg them back into each other, but that should not affect spark in relation to getting it to run. The last time I had a sx not start is was 3 blind mice chewing the wiring harness in half under the motor. It took a while to find...
 
your T.O.R.S willl not be the cause of no spark. This sounds more wiring harness or CDI related. If it is the CDI you should find one in the classifieds cheap. Good luck and let us know.
 


Back
Top