Best triple pipes?

A

artie_bc

Member
Joined
Nov 20, 2012
Messages
38
Location
Swan River, MB
It's time to replace the pipes on my MM700. They are so full of cracks & welds that I don't think they'll hold together much longer. I have Bender pipes now, but was wondering whose pipes are the best, overall?
 

I had power inc. end dumps on my sx and loved um. I pissed of a lot of ppl when we raced. But those pipes at getting harder and harder to find to. IMO if u could find a set try them.
 
I had a set of Haucks on my SXR. They were good. I have heard SLPs have the broadest power without being too loud. Thats what I am going with on my viper. Some seem to fit better than others, which usually equals less dents and rub-thru.
 
I have ran AAen's, Benders, and CPR's. I believe the CPR's where the strongest for power but I would definitely run the Benders on a trail sled.
 
artie_bc said:
It's time to replace the pipes on my MM700. They are so full of cracks & welds that I don't think they'll hold together much longer. I have Bender pipes now, but was wondering whose pipes are the best, overall?
Click to expand...

This question is one that will get all kinds of reviews. Many will reply PI End Dumps, PSI, etc... Here is my question. Are you looking to buy new or used? SLP, Bender, and Hauck be easily had new. PSI and PI are no longer made and CPR are not common. SLPs are a good pipe. They are heavier than the rest but resist cracking and have good power. Benders make good power but are a thinner pipe and crack as you already know. I have ran PI end dumps, Benders, SLP. PI made real good high RPM power but I found the Benders and SLP to be a better "trail" pipe. The SLP definately stood up the best. Used is always a crap shoot as to how many miles are on them and the more miles the more issues (cracks). In the end all the pipes are real close. Except PI center dumps which run 8100 RPM and make the least power.
 
i have a set of PSI, STOCK BLASTERS in my redhead. the power is very good with these pipes, i have not tried other pipes.
 
Thanks for all the input, guys. I'm already clutched & jetted for the Benders, so that's a bit of an incentive to stick with them, but SLP's are available locally, so I guess I'll have to diecide between the two. Shipping is pretty steep on pipes!
 
You must log in or register to reply here.


Back
Top