Just picked up a 97 sx 700. It has...
Power inc trips
760 Hauck BB w/ trail ported head
Hauck bored carbs
Just wondering what i should be running for jetting and clutching. Currently it has 160 mains accross the board, and 50 pilots across the board. I havent pulled the needles yet to see where they are yet, but she seems to be jetted rich as there was a fair amount of gas in the air box. Clutching looks like a ywy, not sure of the weights, but she is pulling 8600 rpms which seems high.
One thing i do know is she sounds like a naughty bitch
Power inc trips
760 Hauck BB w/ trail ported head
Hauck bored carbs
Just wondering what i should be running for jetting and clutching. Currently it has 160 mains accross the board, and 50 pilots across the board. I havent pulled the needles yet to see where they are yet, but she seems to be jetted rich as there was a fair amount of gas in the air box. Clutching looks like a ywy, not sure of the weights, but she is pulling 8600 rpms which seems high.
One thing i do know is she sounds like a naughty bitch
power incs are loud thats for sure. 8600rpm is about right
Removed the needles, 4th clip on mag and cntr, 3rd on the pto. Sounds pretty normal. Clutching is still stock! The previous owner said he wanted to do some clutch work but never got around to it...he never really got to appreciate this thing with that clutching!