YaMmY_ViPeR
New member
Hello, i own 2003 sx viper and was looking to get the full potential of this 700 triple monster . i will have a few thousand dollars to sink into it after this season and i wanted some opinions.
already have slp triple pipes, and i was looking to build on that buy purchasing the slp trail porting kit. slp claims that when combining the two you can reach 160 hp.
i also wanted to get either a mbrp or bender can. whats the pros and cons of each? and wich will i get the best results from? (hp gains, weight loss, awesome sound)
and i was going to install a heelclicker clutch kit? anyone have one of these?
last of all i was going to stud a little more aggresively.
anyway those are my ideas , any opinions or feedback would be greatly appreciated.
already have slp triple pipes, and i was looking to build on that buy purchasing the slp trail porting kit. slp claims that when combining the two you can reach 160 hp.
i also wanted to get either a mbrp or bender can. whats the pros and cons of each? and wich will i get the best results from? (hp gains, weight loss, awesome sound)
and i was going to install a heelclicker clutch kit? anyone have one of these?
last of all i was going to stud a little more aggresively.
anyway those are my ideas , any opinions or feedback would be greatly appreciated.
Agpetro
Member
If you already have slp triples then you are going to be stuck with the slp can. Bender and mbrp only man cans for the single pipe vipers. Benders triple pipes come with their own setup of a can for their triple pipes which will never work with slp pipes.
Studding a track will also do better for traction running that hp. I ran 192 studs in my piped viper when it was a 121. Hooked really good. You could also look at dropping a tooth or two on the top gear. That will give you more power on low end.
Studding a track will also do better for traction running that hp. I ran 192 studs in my piped viper when it was a 121. Hooked really good. You could also look at dropping a tooth or two on the top gear. That will give you more power on low end.
Send a PM to mrviper he'll set you up real good and you'll smoke these new 2014 plastic Scrap LOL!
Last edited:
3g racing
New member
Mr viper is the way to go save all your money on the bolt on and give him a pm
staggs65
Moderator
That's "DrViper" haha.......no really it's Mrviper700 on here
