blueblood68
New member
I have one of these bender cans for my srx in the garage and was just curious, when putting this on a stock sled does it require any changes to the jetting. Sled it came off had cold air intake so I know that requires changing jets but not sure if can alone would? I know that they don't perform as well as stock but I don't mind the change in the sound and if I can switch from one to the other and not have to worry about changing jets then I will give it a shot.
madzx2
Member
I run a Bender can on my 00 srx and didn't change any jetting.
averagesleder
New member
Never changed the jetting on mine. Wait to you compare the weight of them.
RB2001SRX700
Lifetime Member
no jet changing for me. love the sound. they let the heat out of the pipes faster than stock can is what I heard.
blueblood68
New member
Awesome will try it tomorrow. Thanks.
blueblood68
New member
Well I put it on today and it does sound good I will keep an eye on Egt gauges and see if there's much difference .