88 yamaha 570
New member
Ok guys here's the build I'm doing with my boss for his RX-1 turbo sled
First off I'm skipping through allot of the build as it's almost complete. We put an apex motor in with thicker head gasket and ARP studs. GT-28 turbo, ran with a boondocker controller. Putting a campolast track with allot of chisels. Not sure on exact amount yet.
Sent from my iPhone using Tapatalk
First off I'm skipping through allot of the build as it's almost complete. We put an apex motor in with thicker head gasket and ARP studs. GT-28 turbo, ran with a boondocker controller. Putting a campolast track with allot of chisels. Not sure on exact amount yet.
Sent from my iPhone using Tapatalk
88 yamaha 570
New member
Sent from my iPhone using Tapatalk
88 yamaha 570
New member
This is the engine bay. I wish I had pics before the inter cooler was installed.
Track and suspension removed.
Old track
This is what we found under the tunnel. Going to have to make some sort of cover for the exhaust and charge piping(previous owner was a cob it kinda guy) lol.
No slip drivers installed.
AEM Wideband installed
Start of the chisels. Track was bought used with 50 miles on it already drilled so were working with the old holes and drilling a few new ones
Sent from my iPhone using Tapatalk