Eric_04
New member
Hey, just wondering if anybody would happen to know what the specs should be for a 91 EX 570 stator? Ive been searching and searching, and only found one suggestion. It was not on this site, just some random place that popped up doing a search on yahoo. I figure if anybody would know, it would be somebody on here. I searched for an hour or so on here and didnt really find anything. Any help is appreciated. The specs I did find are as follows:
Source coil- Which according to him are the brown and black/red wires should be 530 ohms.
Pulse coil- White/red and white/green should be 220 ohms.
Lighting coil- Yellow and black wires should be .36 ohms.
All specs plus or minus 10%.
Is this correct?
Source coil- Which according to him are the brown and black/red wires should be 530 ohms.
Pulse coil- White/red and white/green should be 220 ohms.
Lighting coil- Yellow and black wires should be .36 ohms.
All specs plus or minus 10%.
Is this correct?
Last edited: