Wizard
Member
I replaced the skid in my 98 SRX600 to an 11.5" so I know they bolt right in. I also bought an '01 SRX700 that already had it done. Last year I picked up a project 98 SRX700 and have it running really well, but now I want to set it up the same way.
Not worried about cornering, just looking for the facts...
Anyone know for sure if it can be done without buying the whole skid; can just the shocks be swapped; other? If you've converted from 8 to 11.5 without just swapping the whole skid, fill me in or point me to a thread/video/website/whatever! Thanks!!!
Not worried about cornering, just looking for the facts...
Anyone know for sure if it can be done without buying the whole skid; can just the shocks be swapped; other? If you've converted from 8 to 11.5 without just swapping the whole skid, fill me in or point me to a thread/video/website/whatever! Thanks!!!
viperking
Active member
Shocks and limiter straps are all you need. Rest of the skid is exactly the same
shaggyzr2
Active member
Don't you need the long travel transfer rods too?