devinzz1
Active member
I know what i want is out there but i cant seem to find it. I want a primary clutch setup. 97 sx 700 reeds, silencer, 2 layer gasket. Want an aggressive, playful, ditchbanger setup.
Please, thank you, and sorry!
Please, thank you, and sorry!
I'd leave the motor for now, and concentrate on suspension
devinzz1
Active member
Not one part of my suspension front or rear is stock.
Stock clutch weights are wearing. Im revving to 9k on long runs. If not i will replace weights and spring with whats in it now
Is this what your looking for.
turks
51/43 Helix, stock weights w/4.5g rivet in 1st hole and 3.1g in tip, 2-3 engagement shims, stock springs, 1 or 2 layers removed from head gasket and 22/40 gearing. Jetting: 142.5 mains
turks
51/43 Helix, stock weights w/4.5g rivet in 1st hole and 3.1g in tip, 2-3 engagement shims, stock springs, 1 or 2 layers removed from head gasket and 22/40 gearing. Jetting: 142.5 mains
Last edited:
devinzz1
Active member
ordered this setup but where do i get the engagement shims?
HTML:
fhttp://www.hauckpowersportsinc.com/pages/CustomCatalog/Product/1910
Last edited: