Wisconsinvmax
Member
Hey guys just bought some new 6inch carbides from Bergstrom skegs and didn't know that my skis weren't factory kinda my fault being a new sled owner.. my problem is the bolt pattern does not line up which no big deal just drill new holes in the plastic but then I realized the bolts are not long enough to go through the plastic. So I don't really know what to do could call skegs back for a refund or just buy factory skis don't really know what to do probably could have extra bolt length welded to them at work if you guys think that would be an alternative just kinda stumped and looking for advice if any one has any input or adviceni would greatly appreciate it thanks for your tim... and sorry if this is a dumb ? Just kinda stressing been a rough day
sleddineinar
VIP Member
Call Bergstroms with the stud measurements of the old carbides and say they are plastic skis. They can probably help you out, and let you exchange the old ones. Maybe post a picture of the skis here too, and we can help you identify the ski.
Wisconsinvmax
Member
thanks for the advice gonna call this afternoon.. Wish I would've know to look into the skis before I purchased them but being anoob guess I have alot to learn rode alot in my life but never had to do anything to the sled but ride it now that I own one gonna have to learn alot.. As for the skis I have looked they are SLP tivar skis just hoping Bergstrom works with me they aren't real cheap to purchase. Thanks again for the input