VMax SX stock can drill mod, and some advice

[lil3incher]

I am doing some research on this and \i love the sound, But I was wondering if there is any down sides to doing this like blowing engine or damaging something, almost seems to good to be true, Any horsepower gains or loses with this mod, Hopefully someone here has first hand experience with doing this that could help me out, I don't want to ruin my stock can if there is a chance of damaging the engine, also what about v force reeds, any advantages, and also what would be the best gearing for lots of low end grunt, don't really care about top end so much, and do you guys have any idea what the largest track size that will fit my 98 VMax SX , Thanks for any help that you can give me

 

[A couple of bucks]

1. No worrys about damaging the engine. I'd like to say there's a hp gain, but probably not. Just a REALLY nice tone coming from your engine.
2. Reeds-- Carbon Tech or OEM http://www.carbontech.com
3. 1.5 track comfortably w/ front protectors removed.

 

[bluemonster1]

go with Carbon Tech reeds,have them in my 600 and still intact for a lot of years.