Bolt-On/Interchangeable SX parts?

[sloTJ]

Hello everyone, hope all are healthy and well. I have a '97 SX and would be interested in "modernizing" it or any ideas of making the sled different. I'm wondering what body/cosmetic parts from other sleds (viper/other newer sleds) will fit directly on an sx chassis. I have a viper skid in mine which is OK but much better than my old skid which sat low and rode poorly.

Also since buying it, the hood has never fit over the belly pans correctly... What's broken or bent? I think this sled has been driven into a few stationary objects in its life time before me.. Haha thanks doods.

 

[00sxrjoe]

Srx/viper rotor lighter, viper seat is lighter, viper front bumper brackets are alum vs steel little mod

 

[devinzz1]

Dual headlight/dash upgrade. Higher seat along with higher and wider bars will give it a more "modern" feel as well.

 

[sloTJ]

Dual headlight/dash upgrade. Higher seat along with higher and wider bars will give it a more "modern" feel as well.

With the dual headlight and dash/gauges, don't you new to upgrade the ignition system too I've heard?

 

[sloTJ]

Srx/viper rotor lighter, viper seat is lighter, viper front bumper brackets are alum vs steel little mod

Front bumper brackets?? Not the front bumper itself? No viper rear bumper on sx?

 

[devinzz1]

With the dual headlight and dash/gauges, don't you new to upgrade the ignition system too I've heard?

run lower wattage bulbs

 

[sloTJ]

Lower than 35w?

 

[devinzz1]

Lower than 35w?

Lower high beam wattage. people have run 100watt bulbs in the single bulb setup so try to stay bellow that. You can get bulbs where both low and high beam are 35watt. Put in an led taillight if you want to lessen the draw (and have a brighter tail light)