Latest activity
-
sent to DM -
Maim replied to the thread Word Thread.hammer
-
OK, talked to Gerry at Bender Racing Canada. He was there when they were making the big bore pipes. He said they never made a big bore... -
sideshowBob replied to the thread SRX Big Bore Pipes.I tried pretty well every type of aftermarket pipes on my BB ported 2002 SRX and only pipes that seemed to be of any gain were the...
-
JJeremybeiler replied to the thread Carb help 02 viper.Thank you for the information! I will put it to use, ain’t nothing better than a smooth running viper
-
MURDER YAMAHA replied to the thread Carb help 02 viper.There is zero chance it needs a jet change for a silencer. I think most here would agree. I think the extra hose you are talking about... -
RON HYDRAULIC YAM replied to the thread Word Thread.correction -
JJeremybeiler replied to the thread Carb help 02 viper.Have you ever seen a viper with the vent lines connected to the air box plus a vent or suction hose connected to the top of the carb? On...
-
JJeremybeiler replied to the thread Carb help 02 viper.It’s an 02 viper, talked to a Yamaha guy at a shop said I need 160 jets for an mbrp can
-
MURDER YAMAHA replied to the thread SRX Big Bore Pipes.So, I talked to Gerry at Bender racing Canada about some Viper Pipes. I also asked him about the SRX big bore pipes. He said you can run...
-
MURDER YAMAHA replied to the thread Identity these pipes.OK, talked to Gerry at Bender Racing Canada. He was there when they were making the big bore pipes. He said they never made a big bore...
-
MrSled replied to the thread Repair manual.sent to DM -
Yep, I would run the stock main jets, move the clip on the needles to be at 3 1/2, and turn the fuel screws to 1 7/8 turns out. (They...
-
jsbravo replied to the thread Repair manual.Hi, Just payed the VIP membership ☺️ -
MURDER YAMAHA replied to the thread Carb help 02 viper.Yep, I would run the stock main jets, move the clip on the needles to be at 3 1/2, and turn the fuel screws to 1 7/8 turns out. (They...
