Latest activity
-
https://totallyamaha.com/snowmobiles/aaTECH/floats_adjust/Carb_Float%20Adjustment.htm -
This is how I did it, with the carb upside down as it is a twin. The phazer factory manual shows the carb completely upside down
-
https://totallyamaha.com/snowmobiles/aaTECH/floats_adjust/Carb_Float%20Adjustment.htm -
03viperguy replied to the thread 2001 phazer project.This is how I did it, with the carb upside down as it is a twin. The phazer factory manual shows the carb completely upside down
-
MrSled replied to the thread 2001 phazer project.https://totallyamaha.com/snowmobiles/aaTECH/floats_adjust/Carb_Float%20Adjustment.htm -
super1c replied to the thread 2001 phazer project.That would certainly do it. But correct me if I’m wrong. Isn’t the measurement taken as the needle is lightly seated? The way I...
-
Maybe this would cause issues. Gauge set at 10.5mm since the specs call for 9.5-13.5mm 😂
-
Maybe this would cause issues. Gauge set at 10.5mm since the specs call for 9.5-13.5mm 😂
-
03viperguy replied to the thread 2001 phazer project.Maybe this would cause issues. Gauge set at 10.5mm since the specs call for 9.5-13.5mm 😂
-
-
sideshowBob replied to the thread 98 SRX 700 pistons.You should be able to use pistons from any of the 1998 to 2002 700 SRXs and any 2002 and up 700 SX Viper but unfortunately no... -
HMy 98 is due for pistons, I am pretty sure they are out of spec. I understand the newer models have different port timing on the...
-
It runs! It's a little bit boggy and seems to be missing. Pulled the carbs back off and they seem to have sucked in some crap. I'm also...
-
sideshowBob reacted to yamisrx's post in the thread Need to figure out my 02 SRX 700 hard starting! with
Like.
Yes that could be something to think about. I only got to ride the machine a couple weekends in January this year. It sat two months... -
New coil installed last night, I have spark! I'll be putting the carbs back in today at some point and trying to fire it up. I want to... -
03viperguy replied to the thread 2001 phazer project.It runs! It's a little bit boggy and seems to be missing. Pulled the carbs back off and they seem to have sucked in some crap. I'm also...
