Latest activity

What's new New posts New media New media comments Latest activity
  • 03viperguy
    03viperguy replied to the thread Sx style triple pipes.
    Have you contacted aaen though? The site is dated but I thought they were still cranking things out
  • Maim
    Maim replied to the thread Word Thread.
    hubbard
  • super1c
    super1c replied to the thread Word Thread.
    Mother
  • Maim
    Maim replied to the thread Word Thread.
    child
  • 03viperguy
    03viperguy replied to the thread 2001 phazer project.
    It runs and idles pretty dang well with the floats adjusted and a fresh battery. Seems a little flat right off idle, maybe turn the air...
  • 03viperguy
    03viperguy reacted to super1c's post in the thread 2001 phazer project with Like Like.
    Always been a triple guy. Good info to know, didn’t realize there was a different method between twins and triples!
  • super1c
    super1c replied to the thread 2001 phazer project.
    Always been a triple guy. Good info to know, didn’t realize there was a different method between twins and triples!
  • super1c
    super1c reacted to MrSled's post in the thread 2001 phazer project with Like Like.
    https://totallyamaha.com/snowmobiles/aaTECH/floats_adjust/Carb_Float%20Adjustment.htm
  • super1c
    super1c reacted to 03viperguy's post in the thread 2001 phazer project with Like Like.
    This is how I did it, with the carb upside down as it is a twin. The phazer factory manual shows the carb completely upside down
  • 03viperguy
    03viperguy reacted to MrSled's post in the thread 2001 phazer project with Like Like.
    https://totallyamaha.com/snowmobiles/aaTECH/floats_adjust/Carb_Float%20Adjustment.htm
  • 03viperguy
    03viperguy replied to the thread 2001 phazer project.
    This is how I did it, with the carb upside down as it is a twin. The phazer factory manual shows the carb completely upside down
  • MrSled
    MrSled replied to the thread 2001 phazer project.
    https://totallyamaha.com/snowmobiles/aaTECH/floats_adjust/Carb_Float%20Adjustment.htm
  • super1c
    super1c replied to the thread 2001 phazer project.
    That would certainly do it. But correct me if I’m wrong. Isn’t the measurement taken as the needle is lightly seated? The way I...
  • super1c
    super1c reacted to 03viperguy's post in the thread 2001 phazer project with Like Like.
    Maybe this would cause issues. Gauge set at 10.5mm since the specs call for 9.5-13.5mm 😂
  • MrSled
    MrSled reacted to 03viperguy's post in the thread 2001 phazer project with Haha Haha.
    Maybe this would cause issues. Gauge set at 10.5mm since the specs call for 9.5-13.5mm 😂
Show older items


Back
Top