Latest activity

No matter what if you go thinner head gasket you will need to run premium. The gas today is so crappy I would not risk it. I have never...

No matter what if you go thinner head gasket you will need to run premium. The gas today is so crappy I would not risk it. I have never...

I read online that the 94-95 head gaskets were the same but 0.6mm thick and the 97+ headgaskets were 1.4mm thick, would it be safe to...

Here are specs charts: https://totallyamaha.com/snowmobiles/AAATuning%20Chart/Specs.htm You can run a single layer or remove center and...

if you are going to run 87 octane gas, leave the head gasket alone. you will get more out of clutching than messing with the head...

welcome! you can run a mountain sled on the trails but it will show 3 common issues. 1- ski width. trail sleds have a wider front...

if you are going to run 87 octane gas, leave the head gasket alone. you will get more out of clutching than messing with the head...

It will be a descent sled for off trail. If you a sit down rider the MTN sleds dont ride the best. You should also register and ask 4...

usually on the older sleds, it would just ground out the coils when you hit the kill switch or turned ign off. sounding like you need...

It will be a descent sled for off trail. If you a sit down rider the MTN sleds dont ride the best. You should also register and ask 4...

Here are specs charts: https://totallyamaha.com/snowmobiles/AAATuning%20Chart/Specs.htm You can run a single layer or remove center and...

expensive

I have recently bought a 1998 vmax xtc 600 twin with 7500 km’s and was wondering if theres any mods to do that would be worth it? Sled...

Looking at purchasing my first sled. I will be riding mostly groomed trails with the odd off trail adventure. I know this is technically...

how do i get this sled to turn off ??? checked all the grounds where are the ground blocks 92 vmax4