Latest activity

How have these been working for you?

Would anyone have any suggestions on clutching for a 98 vmax 600 twin? I have a 1.25” track, 23/39 gearing, reed notch mod and thinking...

I blew a belt today (it looked like in rough shape to begin with) and put on my spare and it seemed to pull harder and would go past...

x2 on clean and inspect the clutches. a new primary spring might not hurt as well.

i think you are right. the only ones i have seen with those yellow lights on the hood where all japan models. it might have came to...

These are known for being hard on rollers and weights. Have you checked the condition of those? 8200 would be the high end, 8000 is peak...

Did a little reverse engineering last night. Pulled the secondary and it looks like they followed the SLP clutch setting...

I have a 1998 vmax 600 xtc twin which i changed the gear ratio from 23/39 to 21/39, put a 1.25” track on and cleaned everything and the...

Just recently sealed the deal on this project. i think its a japanese market sled. looking to see if any old guru's have heard of it...

it was a tow truck company if memory serves and it was a hobby.

Thanks Ron I think it's perhaps possible to conect88 on my 91 but I need a wiring diagram that is no more available from Yamaha to...

I poked around and have never seen so many diff part numbers for two CDI's that look the same in the pictures .. It's like they changed...

Wire bk/w is seperate on 88 and not on 91 andf can't find where they are going to connect it I know it's for stop engine but 91 is on...

Thanks Maim ,never heard of scaper of yamaha in Quebec... Is ManualsLib a good source for manual? What I understand is that cdi act as a...

Where did you buy it and do you have a brand name?