Yamaha Nutz
New member
for all you guys asking for this ...give me a day or so and I will post the measurements with diagrams as I have to make up a new one because I cannot find it on my computer ....
thanks Nutz
thanks Nutz
specs for mounting a Phazer skid in a old gpx/EX or SRX
- Thread starter Yamaha Nutz
- Start date
jimmy99
New member
Cool.
Just a thought, maybe one of the guys you sent the information to before could send a copy back to you. The post i saw it on you were dealing with Yamaman700srx. Maybe he still has a copy of it.
Jimmy
Just a thought, maybe one of the guys you sent the information to before could send a copy back to you. The post i saw it on you were dealing with Yamaman700srx. Maybe he still has a copy of it.
Jimmy
Throttle Junkie35
New member
Yamaha Nutz
New member
A is 6''
B is 5 3/4'' take these measurements and mark them out in your chassis
Whereswade
Member
This is for any sled? Would this work in a 73SL338? (Not that I'll do this, but I get crazy ideas looking at my parts!)
jimmy99
New member
Thank you, this will be very useful.
ssman
New member
Super awesome thanks for sharing !!! When you say measurements are from inside of tunnel. Are you measuring from the drive shaft or directly from the front of the tunnel ? Thanks again !
YooperWoods
New member
What he means is the down measurements for A and B are measured from inside the tunnel down to the center of those mounting points. The rest are measured from center of axle and center of both mount holes.