2000sxr700 bender pipes

brianbailey440

brianbailey440

Member
Joined
Jan 22, 2012
Messages
379
Age
55
Location
berlin n.h.
looking for some advice.put the bender pipes on my sled,55 pilots,150 mains,3.0/4.0/3.0 setting on the needles.51/43 helix , 22-40 gearing, 1 inch predator track.sled rips when its cold,10-20 degrees.but, it doesnt like to rev when its warm,20-40 degrees.should i change the pilots to a smaller size?52.5?or should i drop the needles to a 2.5/3.5/2.5 setting?what would work best for my sxr?thanks in advance. brian
 
brianbailey440 said:
looking for some advice.put the bender pipes on my sled,55 pilots,150 mains,3.0/4.0/3.0 setting on the needles.51/43 helix , 22-40 gearing, 1 inch predator track.sled rips when its cold,10-20 degrees.but, it doesnt like to rev when its warm,20-40 degrees.should i change the pilots to a smaller size?52.5?or should i drop the needles to a 2.5/3.5/2.5 setting?what would work best for my sxr?thanks in advance. brian
Click to expand...

You will have to drop the mains when you ride in those warmer temps.
 
I always had problems with the 52.5's and ended up with 47.5's, it was just way too rich for the Benders. I also run the needles in the stock location. This is for regular cold winter temps and was fine when it got warmer also, might be a good place to start.
 
You must log in or register to reply here.


Back
Top