I just put asn sc3 in my 94 vmax, very easy installed, the front bolt stayed in the original spot, top idle had to move a bit, but very easy. And the rear most, I reinstalled the original 3 bolt plates on and mounted the furthest back bolt into the front most hole. Then just drill out the other bolt holes, install bolts and your done. Took me maybe a hour or two, that includes measuring off of the doner sled. I also had to add some spacers on the inside of the tunnel as the sc3 is not as wide as the original skid.
The ride of this new skid is night and day!!!! The old girl will lift the ski's for 500 feet if you loosen the rear shock for max transfer. Soaked up all the bumps with ease. This is by far the best upgrade to do on the old vmax.