viper customization

O

ontario sledder

Member
Joined
Nov 5, 2014
Messages
94
Location
Ontario
here are a couple of pictures of my sled.... sorry about the pictures being sideways... I have painted the hood vents and hinges white, just wondering what else you guys think I should paint and what colour. or if you have any other mods I should do, thanks!!
 

Attachments

  • GetAttachment (6).jpg
    GetAttachment (6).jpg
    27.1 KB · Views: 198
  • GetAttachment (7).jpg
    GetAttachment (7).jpg
    27 KB · Views: 197
Where do you ride the powder? I'm looking for places to ride this upcoming season...you could probably remove those ski loops and put on some white ones...I'm guessing that's what ACB was going to mention...
 
Cooper0809 said:
Where do you ride the powder? I'm looking for places to ride this upcoming season...you could probably remove those ski loops and put on some white ones...I'm guessing that's what ACB was going to mention...
Click to expand...

I ride in woodstock and lonon area. I ride the tree lines and ditches, drifts, along with a couple of hilltop spots where there is sometimes 3 feet of powder.
 
White ski loops was what I was thinking. Get some white duct tape and start w/a strip that covers the inside of the loop. Then put a strip on the outside of the loop to cover the remaining blue. Prep w/Naptha and use a heat gun to aid in adhesion.
Also, if you could add a bit of white up @ the mirror area. Is there a molded in place on the back side of the mirror that you could add some paint to.
 
A couple of bucks said:
White ski loops was what I was thinking. Get some white duct tape and start w/a strip that covers the inside of the loop. Then put a strip on the outside of the loop to cover the remaining blue. Prep w/Naptha and use a heat gun to aid in adhesion.
Also, if you could add a bit of white up @ the mirror area. Is there a molded in place on the back side of the mirror that you could add some paint to.
Click to expand...

Thanks, I will try that and see what it looks like! And I don't have mirrors..
 
A couple of bucks said:
My bust. I was picturing the hand guards in my head and mirrors is what I put down. I was thinking of a white accent stripe. The mind is the first to go.
Click to expand...

No worries! I was thinking about putting white on the hand guards, but I don't know what to use that won't chip when I hit a tree branch...
 
ontario sledder said:
That would look wicked! What would you suggest to paint the tunnel?
Click to expand...

Aluminum wheel paint would work good aswell as most automotive quality enamels like "engine paints" On the running boards you can use a bed liner so it wont wear off and it will give you alot of added grip over the bare metal.
 
devinzz1 said:
Aluminum wheel paint would work good aswell as most automotive quality enamels like "engine paints" On the running boards you can use a bed liner so it wont wear off and it will give you alot of added grip over the bare metal.
Click to expand...

Do you have any pictures of what you stated before done to a sled? I just don't wanna do it, then not like it and struggle to get it off...
 
ontario sledder said:
Do you have any pictures of what you stated before done to a sled? I just don't wanna do it, then not like it and struggle to get it off...
Click to expand...

Ive seen it done on vipers before but now all you get is 2014s when searching for anything viper related. Just look at the older sx sleds that came factory with a black tunnel. If your unsure you can plasti dip or vinyl wrap the tunnel for removeability.
 
just sayin,,,,mirrors are good,,,,, if you dont know, sooner or later you will be run over.............
 
You must log in or register to reply here.


Back
Top