Phazer-I/II , Running board... ?

[TURBLUE]

When changing the length of the skid do you have to change where the suspension bolts ? I'm going to make my phazer 136. Do I have to move anything or is it a bolt up and go? I know i need to make my tunnel extension

You don't change the skid mounting points unless you don't have long enough rail extensions. I have the factory 121-136 extensions if someone can use them. I used a Arctic cat bumper and the pro rmk boards picked up used for 100.

 

[spirudamax750]

Thanks and pm sent about the extensions

 

[captnviper]

http://minneapolis.craigslist.org/csw/snw/5419482148.html
Here's a couple I thought about buying.

Did one of you guys buy the boards from this ad? brand new take offs for $35 they are gone now.

 

[Jean-Francois Aubin]

Did one of you guys buy the boards from this ad? brand new take offs for $35 they are gone now.

is not me, but i jhave send email to this seller and i never receive answer. 35 is very cheaper price!

 

[TURBLUE]

Had to add some tunnel stiffeners to the back. Was a little week there. Just got them off a pro. Worked out well. Strong now.

 

[Jean-Francois Aubin]

Had to add some tunnel stiffeners to the back. Was a little week there. Just got them off a pro. Worked out well. Strong now.

View attachment 60413
View attachment 60414

Very beautiful job!

 

[Jean-Francois Aubin]

Hi Turblue, this part is sold new? Do you have part number?

 

[TURBLUE]

Basically the boards and tunnel brackets are off a 13-15 Polaris pro rmk. If you look online Polaris parts on the model can get them there. Just find someone parting out pro. What I did. These boards aren't a direct bolt and fit. Takes a bit of cutting and drilling to get them to fit.

 

[BigMan76]

Those WRP Wasatch Recreational Products though; if they are straight bolt-ons, I might grab a set or two!

 

[TURBLUE]

Well works awesome. Had a couple close calls with the Springer brakes. So added hydraulic.



http://vid61.photobucket.com/albums/h60/Turblue/Mobile%20Uploads/trim.CEC1F734-069D-493A-88D3-9C901556773C_zpszybircsy.mp4

 

[guigui]

you wouldn't happen to have a picture of the brake caliper bracket?

 

[TURBLUE]

It's ugly. Lol. Just took some 1/4 flat bar and ground out profile of brake for tight fit. Also welded a corner piece on at top. Powdercoated and installed. Used spacers to set the rotor distance.

 

[Maim]

the bracket looks good. odds are you might get some requests for them as there are other riders who would like to convert to hydraulic brakes too.

 

[MDEVO]

Wow, nice work!
Did you have to change much to fit that lug height??
Also, What brake system is that off?
Appreciate if you have time to reply...cheers!

 

[MDEVO]

Dude didn't reply....
So I bought his sled instead.....lol!

 

[CraveSingletrack]

Sorry to dig up an old thread, but any specs on the skid setup? I'm putting together parts to do a phazer long track. build this summer.

 

[Lasse]

Any specs on the skid setup ?
I'm putting together parts to do a Phazer long track build this summer.

It all depends on what skid you are going to use.

 

[MDEVO]

Sorry to dig up an old thread, but any specs on the skid setup? I'm putting together parts to do a phazer long track. build this summer.

What specs are u looking for? It's a Stock 136 skid, mounted in stock location. Rail extensions lengthened to accommodate the 141" track, idlers removed, and 2 wheel rear axle installed.