stator replacement

C

CaptBillvmax700

New member
Joined
Sep 14, 2015
Messages
52
Location
Indiana
has anyoone on here ever replaced a stator? i just ordered one the other day and thinking about doing it myself. i have seen a couple videos on it already i didnt think it looked too bad. i also ordered a clutch puller too. just wanted to know what you guys thought about changing it.
 
CaptBillvmax700 said:
has anyoone on here ever replaced a stator? i just ordered one the other day and thinking about doing it myself. i have seen a couple videos on it already i didnt think it looked too bad. i also ordered a clutch puller too. just wanted to know what you guys thought about changing it.
Click to expand...

Its a pretty painless replacement.
 
pull exhaust off, remove 14mm bolts holding recoil on, remove flywheel nut (Cant remember but i think it might be left hand thread), remove flywheel with a puller. From here your stator should be exposed. Remember to use the exact right size phillips head bit and ratchet cause the mounting screws are real tight. Clean any rust off flywheel before re installing.
 
i watched a video of a stator replacement on youtube but it was for an arctic cat but i figured the process would be very similar. the stator should come in the mail today and the clutch puller comes saturday. i got the puller off of amazon from 636 distribution. it is a universal clutch puller so i hope it works. i will post back up here and let you know how it goes.
 
You need a flywheel puller, not a clutch puller. The screws holding the stator on can be a pain to loosen up, I use and impact driver to loosen them.
 
You must log in or register to reply here.


Back
Top